Description:
Use in conjunction with any acrylic medium or acrylic colour when increased flow and absorption and decreased film tension and friction are important.
A flow enhancer that improves the flow, absorption and blending of any water-soluble paint (i.e. acrylic paint), medium, ink or dye.
Minimizes brush marks by reducing the friction of paint application.
Does not contain a binder. Over thinning of acrylic paint with Liquitex Flow-AidTM and applying to a non-absorbent surface (i.e. gessoed canvas) may result in poor adhesion. Always make a test piece for your particular application and surface.
On non-absorbent surfaces, will increase the fluidity and open (drying) time of the paint.
On absorbent surfaces, will act as a stain, dye or watercolour.
Directions
Liquitex Flow-AidTM is a concentrate. Dilute with water before mixing into the paint. Distilled water is best since the quality of tap water varies.
Minimum dilution: 1 part Liquitex Flow-Aid to 10 parts distilled water to achieve Flow-Aid Water.
Normal dilution: 1 part Liquitex Flow-Aid to 20 parts distilled water to achieve Flow-Aid Water.
Do not use undiluted. Using undiluted may result in poor paint adhesion, cause the paint to crack, remain tacky and become water sensitive.
Do not shake or rapidly stir. This will increase the foaming of Liquitex Flow-Aid. Wait until foaming has subsided before using.
Absorbent surfaces: Use as much Liquitex Flow-Aid as necessary. The Flow-Aid water/paint mixture will be absorbed by the support.
Mix Liquitex Flow-Aid water into a water-based paint. Do not mix Liquitex Flow-Aid with turpentine or oil paint.
Do not use Liquitex Flow-Aid in marbling, as this technique requires that the surface tension of the water film be maintained.
Reviews
There are no reviews yet